Kitchenaid Nespresso Leaking Into Drip Tray. What To Do!

The Nespresso system is a fantastic option for making high-quality, café-style coffee at home without costing a lot. However, they are not indestructible, just like any kitchen item. Wear and tear (and sometimes just bad luck) can cause your beloved Nespresso machine to break when you need it most. One of the issues is the espresso leaking into the drip tray.

You may have leaking issue if you see water gathering underneath your device or dripping from the capsule holder. Some people frequently conclude that their Nespresso coffee maker is beyond repair and decide to replace it. However, this leaking issue is frequently easily fixed if you identify the reason. 

We’ll examine the likely source of your Nespresso machine’s potential leak in detail in this article, along with some tips on how to fix it.

What Causes My Nespresso Machine To Leak? 

Your Nespresso machine could leak for several different reasons. These consist of:

  • Descalement of the device is required. 
  • The capsule holder is dripping water. 
  • Water spilling from the bottom of the machine.

To pinpoint the likely defect and see a summary of what causes each problem, follow our step-by-step fixing instructions below. 

We’ll also offer advice on how to fix them (without needing to buy a new machine), so you can brew your preferred coffee flawlessly once more.

Once the issue has been resolved, use our advice to extend the life of your Nespresso machine so that the problem never occurs again.

Not Descaling The Machine

Kitchenaid Nespresso Leaking Into Drip Tray

According to our research, the most frequent cause of leaking from a Nespresso machine is that the machine needs to be descaled. At least every three months, or after 300 cups of coffee, descaling should be done.

We’ve provided thorough guidelines on how to descale your Nespresso machine here. Try this first to confirm if it solves the issue. Descaling must be done at least every three months or after 300 cups of coffee, whichever occurs first. Before proceeding with the procedures below, please give your system a brief descale to see if this resolves the issue. 

Unsure about the best descaling solution to use? The De’longhi EcoDecalk is the most acceptable descaling option for the environment and for your wallet out of all the descaling products we reviewed here for your coffee maker. A large bottle is available for as little as $18 on amazon.

See also  Instant Pot Not Pressurizing But Counting Down - What To Do!

Does The Capsule Holder Leak Water?

The most common cause of this leakage problem is improper water entry or escape from the Nespresso capsule.

Water or coffee is dripping from the machine’s front near the capsule holder or drip tray. It only happens when you use the machine to brew coffee. If this is the issue, you’ll be able to know. The water should stream into your mug or cup from the Nespresso machine’s high-pressure flow through the capsule. However, you will experience this if there are gaps or fissures between the capsule and its chamber.

Nozzle Obstructions

A small amount of residue is always left on the nozzle after making coffee. This can accumulate over time and clog the pipe ultimately.

Water pressure and flow are impacted when the Nespresso nozzle is blocked, which causes leaks.

You may be able to clear the nozzle with a needle or a pipe cleaner, depending on the make and type of your machine.

However, using this method has the potential to damage some Nespresso machines, so please consult the user guide.

Capsule Holder With Clogged Ports

Out of sight, out of mind, perhaps? Unfortunately, most Nespresso machines have the dirtiest interiors in the capsule holder.

Scrub the interior of the capsule holder with a cup of hot, soapy water and a stainless wire brush (or even an old toothbrush!).

You can find a cleaning guide online for your Nespresso machine that might be able to solve your issue.

Malfunctioning Capsules

It’s possible that the reusable capsules or coffee pods you use from a third party will not fit perfectly into the Nespresso machine’s capsule mechanism. Grab a few original Nespresso pods to be sure the capsule isn’t the issue. If this does solve the case, you could want to try a different brand of coffee pod. Continue to the next step below if this doesn’t cure the problem.

Look For Water Leakage Beneath Your Nespresso Machine

This typically begins when you turn on the appliance and results in water puddles or droplets on the countertop below. As soon as the machine is finished, try lifting it up to look for pooling. The quantity of water loss may vary depending on the problem’s severity.

Your Nespresso machine’s experience with this issue is most likely caused by a broken seal or component in one of the following:

  • The water tank
  • Its thermoblock (heating element)
  • Piping systems inside
See also  Can You Use Induction Cookware On Electric Stove? Truth Revealed!

Starting with the water tank, check for any breaks after carefully detaching the water tank. The link between the water tank and the rest of the apparatus needs to be looked at, and the rubber seals connecting these parts with a pipe need to be checked to ensure they are in good shape and are not leaking.

See if any water leaks out even after leaving the tank on the bench with a full tank of water. Any leakage can be quickly found by placing a paper towel underneath and seeing if it’s soaked after some time.

It follows that the tank’s bottom valve has degraded in this situation. For assistance finding a replacement water tank, get in touch with Nespresso, or look around thrift stores and recycling facilities.

Internal Pipework or the Thermoblock

Run the Nespresso machine while it is disassembled to check for leaks and see if you can notice any water loss. A clear understanding of potential breakages that could be the source of leaks can be known by attempting this technique.

The machine should not be operated with the open casing since it is exceedingly dangerous and should be done at your own risk. Electricity and water should never combine. The Nespresso machine must be carefully disassembled by extracting the back screws and reopening the rear panels to determine precisely what is causing the leak.

Always unplug your Nespresso machine before servicing to avoid shocks and electrical short circuits. The warranty on your Nespresso machine may be voided if you do this; thus, you should only do it after the device’s expired warranty.

The Boiler (Thermoblock)

The pipes and seals may deteriorate due to high temperatures connected with the Nespresso heating component. This happens because as the metal heats up, it expands before cooling and compressing.

If this leakage problem persists over time, the boiler may develop a dark tint from the constant dropping of water over the hot component.

The Water Pipes and the Pump

A Nespresso machine may experience some bumps while being used in a home or business, which could cause some water circuit parts to come loose and cause leaks.

How To Fix It

Kitchenaid Nespresso Leaking Into Drip Tray

Once you’ve determined which Nespresso part is leaking, you can quickly replace it at your nearby repair or spares center. The damaged component can then be returned, or you can hire a skilled service expert to do it.

The broken Nespresso component should not be repaired; it should be replaced. An old patched-up piece will probably not function as well or as long as a new authentic component. Use a unique heat-resistant adhesive to seal off seams in the water circuit.

See also  Microwave Gets Hot On The Outside? Why

You can physically adjust and firmly tighten any loose parts in the Nespresso machine’s water circuit that was the problem’s source.

When a Nespresso machine’s drip tray is complete, some of them begin to leak, pouring water onto other parts of the machine. You must solve this issue for your appliance to stop dripping water.

Does Nespresso Replace Broken Equipment?

The machines are covered by a two-year limited guarantee from Nespresso. However, this excludes accidental damage and solely addresses manufactured flaws.

Nespresso may service your machine if it has a manufacturing flaw and leaks. The cost of the repairs or replacement, however, will be your responsibility if the leak was caused by accident.

For instance, you would be responsible for paying for repairs if you accidentally knocked over your machine and it fractured. Nespresso may replace your device if it begins to leak on its own, though.

You can ask Nespresso customer support for clarification if you’re unsure whether or not your problem is covered by warranty.

The Cost of Repairing a Nespresso Machine

The price to fix a Nespresso machine varies depending on the problem, from $30 to more than $200. The superautomatic espresso machines are the most expensive to fix; repair prices for this equipment range from $150 to $300.

The cost of repairs will be lessened if you own a manual or semi-automatic espresso machine. Initially, confirm that the repairs are covered by your warranty. You won’t be responsible for any out-of-pocket expenses if it does.

You have two options if the repairs aren’t covered by your warranty: take it to a shop for repair or try to fix it yourself. You might be able to locate new parts online and solve the problem on your own, depending on what the problem is. Although this is not always the case.

If you don’t feel confident fixing it yourself, you can take it to a repair shop. Furthermore, Nespresso will fix your machine for you if you return it to them.


A dripping Nespresso machine need not be disastrous, even though it is the most minor thing anyone wants first thing in the morning. We can rapidly identify the component causing the leak and the take the appropriate course of action by performing a few fast troubleshooting actions.

Leave a Comment

error: Content is protected !!